自动电位滴定法测定气田废水中的C1~-

利用电位滴定法在７１６ＤＭＳ型自动电位滴定仪上实现对气田废水中Ｃ１－的快速、灵敏、准确测定,避免了色度、浊度的干扰。对方法的检出限、标样和实际水样精密度、准确度,进行了全面的测定分析,并与硝酸银滴定法进行了对比。氯化物的检出限为０．３２ｍｇ／Ｌ;相对标准偏差小于等于２．１％,加标回收率在９８．９％１０１％范围内,对同一标样和实际样品的测定两种方法的结果吻合较好。     

OPEN CHANNEL INTERPOLATION OF CROSS SECTIONAL PROPERTIES1

ABSTRACT: This paper confirms the use of interpolated data to refine water surface profiles. Sources of error within these computations are due to truncation error, inaccuracies in geometric data, and improper modeling. Confirmation includes the development of an equation that models the effect of data measurement error on the computed water surface profile. A review of interpolation procedures includes a proposed method based upon geometric properties.     

提高化学需氧量质控合格率的研究

大庆油田化工总厂废水中化学需氧量（COD）的测定采用库仑法。为了提高质控合格率，从人员素质、仪器设备、电级内液等9个方面分析寻找导致误差的主要影响因素并制定对策。同时对影响电极内液及消解的因素进行正交实验确定最佳条件。结果使库仑法质控合格率由90％提高到95％，测定38次标样全部合格。     

基于改进灰色模型的管壁蜡沉积厚度预测研究

为对含蜡原油管道中的蜡沉积厚度进行准确预测,在函数cot(x2)变换的基础上,结合平移变换思想,利用cot(x2+c)变换建立新的改进GM(1,1)模型。以现场管道结蜡数据和室内环道结蜡数据为例,对比改进GM(1,1)模型、基于函数cot(x2)变换建立的GM(1,1)模型及传统GM(1,1)模型之间的预测精度,并分析平移量c对改进GM(1,1)模型预测精度的影响。结果表明:改进GM(1,1)模型的预测精度最高,其次是基于函数cot(x2)变换建立的GM(1,1)模型,而传统GM(1,1)模型的预测精度最低;随着平移量的增大,改进GM(1,1)模型的平均相对预测误差呈现出先减小后增大的趋势,因此合理的平移量有助于模型精度的提高。应用改进GM(1,1)模型来预测管道蜡沉积厚度是可行的,该方法可为含蜡原油管道蜡沉积厚度的准确预测提供参考和借鉴。     

Development of a model to simulate soil heavy metals lateral migration quantity based on SWAT in Huanjiang watershed, China

Lateral transportation of soil heavy metals in rainfall events could significantly increase the scope of pollution. Therefore, it is necessary to develop a model with high accuracy to simulate the migration quantity of heavy metals. A model for heavy metal migration simulation was developed based on the SWAT(Soil and Water Assessment Tool) model. This model took into consideration the influence of soil p H value, soil particle size, runoff volume, sediment amount,concentration of water-soluble heavy metals dissolved in runoff and insoluble absorbed to the soil particles. This model was reasonable in Huanjiang watershed, Guangxi Zhuang Autonomous Region, south China, covering an area of 273 km~2. The optimal drainage area threshold was determined by analyzing the effects of watershed subdivision on the simulation results to ensure the simulation accuracy. The main conclusions of this paper were:(1) watershed subdivision could affect simulation migration quantity of heavy metals;(2) the quantity of heavy metals transported by sediment accounted for 97%–99% of the total migration quantity in the study watershed. Therefore, sediment played the most important role in heavy metal migration;(3) the optimal drainage area threshold percentage to ensure high simulation accuracy was determined to be 2.01% of the total watershed;(4) with the optimal threshold percentage, this model could simulate the migration quantity of As, Pb and Cd accurately at the total watershed and subwatershed level. The results of this paper were useful for identifying the key regions with heavy metal migration.     

ACCURACY AND PRECISION OF NRCS MODELS FOR SMALL WATERSHEDS1

ABSTRACT: In the last 30 years, the National Resource Conservation Service's TR‐55 and TR‐20 models have seen a dramatic increase in use for stormwater management purposes. This paper reviews some of the data that were originally used to develop these models and tests how well the models estimate annual series peak runoff rates for the same watersheds using longer historical data record lengths. The paper also explores differences between TR‐55 and TR‐20 peak runoff rate estimates and time of concentration methods. It was found that of the 37 watersheds tested, 25 were either over‐ or under‐predicting the actual historical watershed runoff rates by more than 30 percent. The results of this study indicate that these NRCS models should not be used to model small wooded watersheds less than 20 acres. This would be especially true if the watershed consisted of an area without a clearly defined outlet channel. This study also supports the need for regulators to allow educated hydrologists to alter pre‐packaged model parameters or results more easily than is currently permitted.     

TRMM降水数据在东北地区的精度验证与应用

利用东北地区2000-2007 年的APHRODITE降水数据,基于GWR方法对TRMM降水数据进行修正,分析新的TRMM降水数据精度,并基于修正的TRMM降水数据对东北地区降水进行时空分布特征分析.结果表明:①APHRODITE降水数据与观测数据之间的线性相关性更高、均方根误差RMSE更小,数据具有较高的精度;②修正后的TRMM降水数据相关系数R有所提高,且RMSE值均有降低.整体来看,TRMM降水数据的降水量数值偏大于观测值;③修正TRMM降水数据在5-10 月的误差相对较小,整体来看,在大部分区域的误差在0~30%之间;④东北地区降水分布极不均匀,整体呈从东南向西北减少趋势.11 月到翌年3 月的降水稀少,降水主要集中在夏季,其中7月降水量最大.     

Comparative analysis of two tobacco surveillance questionnaires used in NHANES: accuracy of self-reported smoking status

National Health and Nutrition Examination Survey (NHANES) uses two tobacco use surveillance questionnaires. One is administered during an at-home interview (HI) and the other, during an examination session at a mobile examination center (MEC). NHANES data for the years 1999–2012 were used to evaluate the consistency of responses to tobacco surveillance questions in HI and MEC interview. In addition, accuracy of self-reported smoking status was evaluated. Of those who reported to be daily cigarette smokers during HI, 18.7% reported to be either some-day smokers or nonsmokers during MEC interview. Of those who reported to be some-day cigarette smokers during HI, 22.1% reported to be daily smokers and 17.5% reported to be nonsmokers. Also, 4.1% of those who reported to be nonsmokers during HI reported to be either daily or some-day smokers during MEC interview. Using serum cotinine measurements taken during MEC interview, 27.1% were found to be smokers and 72.9% were found to be nonsmokers. In general, a moderate to high agreement, as measured by the κ statistic, was found between the self-reported responses to tobacco use questions during the home and MEC interviews as well as between smoking statuses based on self-reported and serum cotinine measurements.     

土壤连续属性空间插值方法及其精度的研究进展

作为土壤变化的时空定量监测方法,土壤属性空间插值方法及其精度是计量土壤学和"数字土壤"领域的重要研究内容。文章首先介绍了土壤属性空间插值的常用方法,包括克立格插值法(Kriging)、反距离权重法(IDW)、样条插值法(Spline)、贝叶斯最大熵(BME)、地理加权回归(GWR)以及高精度曲面建模方法(HASM);其次阐述了土壤属性空间插值精度验证的方法和指标;再次总结了能够提高土壤属性插值精度的6种途径,包括合理选择插值方法、准确设定插值方法参数、合理设计采样数目和密度、注意空间自相关程度和范围的影响、科学安排实验分析顺序以及结合辅助信息进行插值;最后从插值方法的选择、验证指标的选取以及辅助信息的结合三个方面指出了土壤属性空间插值方法及其精度的未来研究方向。     

Comparison of Point Estimation Techniques in the Spatial Analysis of Radium-226, Radium-228 and Potassium-40 in Soil

Many environmental surveys require the implementation of estimation techniques to determine the spatial distribution of the variable being investigated. Traditional methods of interpolation and estimation, for example, inverse distance squared and triangulation often ignore features of the data set such as anisotropy which may have a significant impact on the quality of the estimates produced. Geostatistical techniques may offer an improved method of estimation by modelling the spatial continuity of the variable using semi-variogram analysis. The theoretical model fitted to the semi-variogram is then used in the assignation of weighting factors to the samples surrounding the location to be estimated. This paper outlines the results of a comparison between three common estimation methods, polygonal, triangulation and inverse distance squared and a geostatistical method, in the estimation of soil radionuclide activities. The geostatistical estimation method known as kriging performed best over a range of parameters used to test the performance of the methods. Kriging exhibited the best correlation between actual and estimated values, the narrowest error distribution and the lowest overall estimation error. Polygonal estimation was best at reproducing the data set distribution. Conditional bias was evident in all the methods, low values being over-estimated and high values being under-estimated.